日韩男女视频-日韩免费专区-日韩免费在线视频观看-日韩免费在线视频-日韩免费在线看-日韩免费在线观看视频

KP-60G X-ray cutting special inverter

Project		Instructions
Main power input	Rated voltage	Three-phase,380V/220V,50Hz/60Hz;two-phase,220V, 50Hz/60Hz
	Change value	Voltage:±20%,Voltage unbalance rate<3%;Frequency:±5%
Main power output	output voltage	Three-phase,0～380V;0～220V
	output frequency	0Hz～400Hz
	Overload capacity	150%Rated output current of 1 minutes,110% rated output current of 1 hours.
Control performance	Modulation	SVPWM Mode
	Control mode	V/F control/non speed sensor vector control method
	Given the way	Panel given, external terminal is given, the PC given
	Speed setting mode	Operation panel digital set;the simulation setting and other 13 kinds of speed setting mode.
	Speed setting accuracy	Digital set:±0.01%（－10℃～＋40℃）
		Simulation setting:±0.05%（25℃±10℃）
	Speed setting resolution	Digital set:0.01Hz;Simulation setting:1/1000
	control precision	PG V/F feedback control:±0.05%;（25℃±10℃）
	control range	PG V/F feedback control:1：1000
Input output control signal	reference voltage output	1 road,10V，5mA
	Control voltage output	24V，100mA
	Analog input	1 road,-10V～+10V DC，10bit+Sign bit;1 road,0～10V/0～20mA DC,10bit,JP1 motherboard jumper at the side of V/I location selection
	type commands	2 road,FWD/COM and REV/COM control command input contact terminal.
	Programmable contact input	8 way programmable,can choose the fault reset,DC brake and other 22 kinds of operation control command.
	PG signal input	X7 and X8 for A,B open collector encoder input.
	Analog signal output	2,the output voltage,output current,output analog signal frequency.
	Open collector output	2 Road,10 kinds of running state optional.The maximum output current of 50mA.
	Alarm relay output fault	1 road,contact capacity;NO：250VAC/5A；NC：250VAC/3A; 30VDC/3A
Display	Four digital display (LED)	Set frequency and output frequency,output voltage and other 16 kinds of state parameters,programming menu parameters and 12 kinds of fault code.
	Indicator (LED)	Parameter units,motor running direction,RUN/STOP state.
Environment	Use place	Interior,not subject to direct sunlight,no dust,corrosive gas,flammable gas,oil mist,water vapor,water or salt etc.
	Altitude	Less than 1000 meters above sea level.
	Ambient temperature	-10℃～+40℃
	Humidity	20% ~ 90%RH,no dew condensation.
	Vibration	Less than 5.9 M / S (2 0.6G)
	Storage temperature	-20℃～+60℃
Structure	Protection level	IP20
	Cooling method	Natural air cooling or forced air cooling